Screen Door Installation and Repair in Orlando, FL

Improve access to your outdoor space with screen door installation and repair in Orlando, FL. We install and fix sliding and hinged screen doors for patios, lanais, and pool enclosures. From sticky tracks to torn mesh and broken handles, we ensure your doors glide smoothly and seal properly.

Orlando Screening provides professional screen door installation throughout Orlando, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 407-604-2234 or request your free quote.

Screen door installation in Orlando that actually fits your home and your climate

At Orlando Screening, screen door installation is not a one-size job. We start by looking at how you use the doorway, how often it is opened, and how much rain and sun that area takes during our Orlando summers. A back patio facing afternoon sun needs different hardware and mesh than a shaded side door that is mostly used by pets. We measure your existing opening to the eighth of an inch, check the squareness of the frame, and look for rot, stucco cracks, or loose brick mold that could prevent a solid installation.

For new screen doors, we help you decide between hinged, French-style, and sliding units depending on your layout. For example, many Orlando homes with small lanais work better with a single hinged screen door that opens outward, so it does not interfere with interior furniture. Where wind tunnels are an issue, common in homes between two lakes or near wide retention ponds, we recommend heavier-gauge frames and upgraded closers to avoid constant slamming. Everything we suggest is based on how it will hold up in Central Florida heat, humidity, and thunderstorms, not just how it looks the day it is installed.

Our focus is a door that closes cleanly, seals tight enough to keep bugs out, and survives the children, guests, and pets that actually live in your home. Before we schedule any work, we explain exactly what type of door and hardware we recommend, what it is made of, and how long it is likely to last in an Orlando environment so you can make an informed choice.

How our screen door installation process works from first visit to final check

When you call Orlando Screening for screen door installation, the first step is a site visit, not a guess over the phone. We confirm the rough opening size, inspect the existing threshold and exterior trim, and note any drainage issues such as water pooling at the doorstep during heavy summer storms. If necessary, we recommend adding a low-profile threshold or minor slope correction to keep your new screen door from sitting in standing water.

Once you select a style and mesh type, we order or custom-build the door to fit your opening. For many standard sizes we bring stock on the truck so we can install the same day. For non-standard or older Orlando homes, common in neighborhoods like College Park or Conway, we often need a custom-width or custom-height frame, which we fabricate in our shop.

On installation day we remove any old storm or screen door, clean the jamb surfaces, and correct minor wood or stucco issues so the new door sits level and plumb. We install the frame, set the hinges or roller tracks, and use corrosion-resistant screws rated for Florida exteriors. We then hang the door and adjust it so it swings freely with an even gap all the way around.

Finally, we add closers, handle sets, and bug sweeps, then test the door multiple times. We check that it latches with a gentle push, that the closer does not slam, and that there are no daylight gaps where mosquitoes could enter. Before leaving, we walk you through basic adjustment points so you can fine-tune the closer speed seasonally if you want, and we review simple cleaning steps to prevent dirt buildup from the Orlando pollen season.

Screen door repair that solves the real cause, not just the symptom

For screen door repair, Orlando Screening focuses on why the problem happened. A torn screen might be from pet claws, furniture bumping, or wind-driven branches. Bent frames may be the result of someone leaning or falling on the door, or from repeated slamming during strong afternoon storms. Sticking doors often point to foundation settling or swollen wood jambs from humidity. We look at these factors so we repair the damage and reduce the chance of it happening again.

Common repairs include re-screening panels, replacing broken rollers on sliding screen doors, installing new bug sweeps and weather strips, fixing sagging hinges, and straightening slightly twisted frames. For sliding doors that are hard to move, we remove the screen panel, clean the track of sand and debris, replace worn rollers with stainless or sealed-bearing options, and adjust the panel so it rides smoothly instead of dragging. Many Orlando homes are close to construction sites or sandy retention areas, which accelerates track wear if it is not maintained.

If your screen door will not latch, we inspect the strike plate alignment, closer tension, and frame alignment. Often a few precise hinge adjustments and a re-positioned strike plate fix the issue without replacing the whole door. When wood rot or structural damage is present at the threshold or jamb, we explain the scope clearly, since cosmetic repairs alone will not hold. In those cases we outline options from partial wood rebuilds to full replacement so you can weigh cost versus long-term reliability.

We also offer pet-resistant and child-friendly upgrades during repair, such as stronger lower panels or reinforcement bars that protect the screen fabric from kicks or claws. This is especially useful for busy households where the screen door is opened dozens of times a day.

Material and design choices that stand up to Orlando heat, storms, and insects

Screen door installation in Orlando must deal with extreme sun, salt in the air, and heavy rain, even if you are not near the coast. Orlando Screening only recommends materials that have proven durable in this climate. For frames, we usually suggest powder-coated aluminum because it does not rust, holds its color, and stays straighter than many vinyl options during temperature swings. Where impact or extra strength is needed, such as wide doors on open patios, we can use heavier gauge aluminum extrusions.

For mesh, our standard is fiberglass, which handles everyday use and minor impacts well and does not crease. For homes near retention ponds or wooded areas with intense insect activity, we can install finer-weave no-see-um mesh that keeps out smaller bugs while still allowing airflow. If you have pets that scratch or push against the door, we often recommend pet-resistant polyester or metal mesh in the lower section, which significantly reduces repeat repairs.

Hardware is another key area in Central Florida. We choose stainless or coated fasteners, corrosion-resistant hinges, and closers designed for outdoor use. For sliding screen doors, we use rollers with sealed bearings so sand and moisture from afternoon storms do not seize them up as quickly. Handle styles range from simple latches to keyed options for secondary security. For homeowners concerned about small children, we can install higher latch positions that small kids cannot easily reach while still keeping the door convenient for adults.

We also take appearance into account. Color choices like bronze, white, or custom shades can tie into your existing windows, front door, or pool enclosure. In historic or HOA-controlled neighborhoods, we help you choose a design that meets guidelines without giving up function, such as narrower frames or specific mesh colors that blend with your home’s exterior.

Cost factors, scheduling, and what Orlando homeowners should expect

The cost of screen door installation or repair with Orlando Screening depends on several specific factors. For new doors, the main drivers are door size, frame material, mesh type, hardware quality, and any needed prep work to fix the existing opening. A standard-size aluminum hinged screen door with fiberglass mesh and basic hardware will sit at the lower end of the range. Custom-width or extra-tall doors, pet-resistant mesh, premium closers, or color-matched finishes increase material cost but usually pay off in longer life and fewer service calls.

Repair pricing depends on whether we are re-screening only, replacing hardware, straightening frames, or addressing underlying structural issues. Re-screening a door that is otherwise in good shape is relatively inexpensive. Once we get into rotted thresholds, rebuilt jamb sections, or replacement tracks on sliding assemblies, labor time increases. We always price after an on-site evaluation so you are not surprised by add-ons the day of the work.

In Orlando, the best time to schedule screen door installation is typically late fall through early spring, when humidity is lower and afternoon thunderstorm patterns are less intense. That said, we work year-round and are used to planning around fast-moving storms. For occupied homes, we coordinate so exterior openings are not left open during the hottest or rainiest part of the day. If we expect rain, we stage the job so any work that exposes bare wood or fresh fasteners happens when it is dry.

Turnaround for standard doors is often within a few days, while custom units may take a bit longer due to fabrication time. We explain timelines clearly before you commit. Our goal is a straightforward process: a clear estimate, a firm installation or repair date, and a finished screen door that operates correctly the first time.

Why Orlando Screening is a practical choice for local screen door work

Orlando Screening focuses solely on screening and related exterior openings in the Orlando area, which means we understand the specific problems local homeowners deal with. We see the same patterns across neighborhoods: sliders that seize from sand in Lake Nona, frames warped from sun exposure in Hunter’s Creek, and rusted hardware on older units that were never designed for Central Florida’s conditions. That experience shapes the materials we stock and the repair methods we use.

Because we work locally, we keep common door sizes, mesh types, rollers, closers, and latches on our trucks, which often lets us complete installation or repair in one visit. For more unusual situations, such as older masonry openings where nothing is square, we are used to fabricating or modifying frames so your door seals properly instead of forcing a standard unit into a crooked opening.

We take a no-nonsense approach to recommendations. If a door can be repaired in a way that will hold up, we tell you that and quote the repair. If the frame is too far gone or the opening has structural issues that make repair a short-term fix, we explain why replacement is the better option and break down the costs. That way you choose between repair and replacement with clear information instead of guesswork.

Every job ends with a functional test. We open and close the door repeatedly, check the latch from inside and outside, and verify that the mesh is tight with no wrinkles or gaps. You see the door working before we leave. If anything settles or needs fine tuning shortly after installation, we stand behind our work and handle reasonable adjustments so the door continues to operate the way it did on day one.